How to make a bankbook case



We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Prepare the template that is larger than the actual size of the bankbook.

Cut out the leather with a leather cutter. Be careful not to cut your fingers!

These are all the materials you will need to complete the project.

Apply the oil to the back side of the leather. Make sure you apply a heavy coat of oil.

Apply oil to the leather edge and polish it with the stick of the wood.

Draw a line to show the sewing line. At this time, draw a line about 0.1 inch away the sewing line from the edge.

Glue the belt together using elastomeric adhesive which is used to glue leather.

After the glue has dried, sew it with the wax cord.

Glue the two inside pockets onto the inside of the leather.

At this time, draw a line on the bankbook to make the sewing line. Pierce it with a hammer on the sewing line.

After the glue has dried, sew it with the wax cord.

There is an inside pocket on the right and left side.

You have completed your project. Congratulations!! http://youtu.be/0D24GJsgtrc


Watch the video: MAKING A PASSPORT WALLET HOLDER - DIY LEATHERCRAFT ASMR #leather #diy #asmr


Previous Article

How to create a rose out of napkin

Next Article

How to Make AWESOME Cake Balls